Mistral

M6/M8 - EM/ET

MISTRAL is Paramina’s “petit’’ mobile high pressure piston compressor. 
The unit is 3-staged, air cooled and easy to transport due to the built-in wheels.

MISTRAL provides a reliable source of breathing air due to the unique purification system (a coalescing prefilter installed before the active carbon/molecular sieve cartridge – hopcalite as an option). It is suitable for private divers, small diving shops, diving boats, yachts and small paintball teams

MISTRAL’s very low turning speed accomplishes low noise level, almost zero vibration and ensures long life operation.

“All Mistral M6 models provide the lowest speed rotation of the market, @1200rpm”

w
M6/M8 - EM/ET
w
M6/M8 - BZ
x x

Combined Breathing Air Filter D80x375

Adaptor DIN 300 to DIN 200 (optional)

TECHNICAL DATA

 
Model Power Max. Pressure FAD * Speed Dimensions cm Weight
bar m³/h lit/min rpm L W H Kg
M6-BZ 3.6kW 4stroke petrol 350 6.2 103 1200 88 43 51 55-65
M6-EM 2.2kW/220-230V/50-60Hz 350 6.2 103 1200 78 43 49 53-73
M6-ET ◆ 2.2kW/400-440V/50-60Hz 350 6.2 103 1200 78 43 49 53-73
M8-BZ 4.1kW 4stroke petrol 350 8.4 140 1750 88 43 51 65-73
M8-EM 3.7kW/220-230V/50-60Hz 350 8.4 140 1750 78 43 49 67-85
M8-ET ◆ 3kW/400-440V/50-60Hz 350 8.4 140 1750 78 43 49 67-85
● Oil capacity: 500ml special synthetic compressor oil.
◆ Optional: Classic Version (LxWxH: 94x53x70 cm, 118 kg).
* Measured by cylinder filling (10 lt) from 0-200 bar ±5%.

Design Specifications

 

M6/M8 - EM/ET

M6/M8 - BZ

Start/Stop switch

●

■

Micronic air inlet filter

●

●

Pressure maintaining and non return valve for extended filtration

●

●

Condensate Separator after 2nd Stage

●

●

Combined BA Filter including Coalescing Pre-filter (0.5 mg/m³ oil residual) and B.A. cartridge (AC/MS + HP option), with the supply of absolutely clean air exceeding by far the requirements of EN12021

●

●

Safety Bleed valve in case of BA Cartridge absence

◆

◆

Large Stainless Steel Intercoolers – Aftercooler

●

●

Safety Valves in all stages

●

●

Kevlar filling hose (1.2m) with stainless steel fittings and DIN/INT’L connector

●

●

Electric hourmeter

●

■

Vibration hourmeter/service timer (Running hours, BA filter/oil service hours)

◆

●

Final stage Manometer

●

●

Manual condensate drains

●

●

Motor thermal overload protection

●

■

Automatic belt tensioning system

●

●

Automatic stop system

◆

◆

Automatic start system

◆

■

Automatic condensate drains with manual backups

◆

■

Dual pressure filling facility, allowing 225/330 bar alternative filling

◆

◆

Condensate collecting tank

◆

■

1.5m air inlet hose with particle strainer

◆

●

Special voltage/frequency: 3 x 230 V/ 60 Hz

●

■
● Standard | ◆ Optional | ■ Not Applicable