Print pagePDF pageEmail page

Typhoon Helium / Argon

High-pressure piston compressor for HELIUM & ARGON (HeAr), Compact, 3-staged, air cooled, oil lubricated, model Typhoon Classic 18E,  7,5kW/400V/50Hz, suitable for Helium & Argon compression applications, CE certified.

Model Power Supply Max. Working Pressure (bar) Capacity Dimensions (cm) Weight (kg)
m3/h lit/min L W H
TYPHOON CLASSIC 18E (He/Ar) 7,5kW/400V/50Hz 350 18,0-19,0 300-315 134 58 77 230

Standard Equipment

  • Inlet Solenoid valve NC.
  • Inlet Pressure regulator 16 bar max. inlet / adjusted at 0,1-0,4 bar outlet.
  • Inlet pressure safety valve (before pressure regulator), adjusted at 16 bar.
  • Inlet Pressure Manometer (after pressure regulator) -1bar/+3 bar range.
  • Inlet Pulsation chamber.
  • Inlet Safety Pressure Switch (after pressure regulator), adjusted at 2 bar
  • Inlet pressure Safety Valve (after pressure regulator) adjusted at 2,5 bar
  • Inlet Vacuum Safety Pressure Switch adjusted at -0,5bar.
  • Large Stainless Steel Intercoolers & aftercooler at all stages.
  • Extra intercooler 2nd stage & aftercooler 3rd stage for optimum cooling.
  • Large diameter Halve Head 2nd stage for optimum heat discharge.
  • Large diameter Valve Head 3rd stage for optimum heat discharge.
  • Large diameter Top cover 3rd stage for optimum heat discharge.
  • Final Stage Piston with 8 piston rings
  • Safety Valves in all stages.
  • Condensate Separator after 2nd & 3rd Stage.
  • Final gas purification Filter Ø110Χ495, max working pressure 480bar. Each filter includes one (1) coalescing pre filter (0,5mg/m3 oil residual) & one (1) cartridge Ø65Χ260 (Active Carbon / Molecular Sieve cartridge).
  • Large fan (500mm diam.)  for optimum cooling of cylinders,  intercoolers & aftercoolers, making the compressor capable for continuous operation.
  • Zero Loss Automatic Condensate Drain system via condensate/Helium or Argon return piping system, back inside compressor’s crankcase.
  • Star/Delta starter system.
  • 24V secondary voltage providing safety during routine operation.
  • Emergency Stop button.
  • Start/Stop switch.
  • Automatic Start / Stop system at the desirable pressure.
  • High temperature alarm & shutdown error via Bimetal switch.
  • Low oil level sensor / alarm & shutdown error.
  • Hourmeter.
  • Motor thermal overload protection.
  • Inter stage (1st, 2nd) manometers and Final Stage 400 bar manometer.
  • Built-In Vibration Pads.
  • Non return valve.
  • Automatic belt tensioning system.
  • ¼” BSP female inlet/outlet.
  • Handles for easy lifting.
  • Soundproof covers at top, left and right side – Drilled opening doors at front side.