Print pagePDF pageEmail page

Typhoon Nitrogen

High-pressure piston compressor for NITROGEN (N2), Compact, 3-staged, air cooled, oil lubricated, model Typhoon Classic 18E,  7,5kW/400V/50Hz, suitable for Nitrogen compression applications, CE certified.

Model Power Supply Max. Working Pressure (bar) Capacity Dimensions (cm) Weight (kg)
m3/h lit/min L W H
TYPHOON CLASSIC 18E (N2) 7,5kW/400V/50Hz 350 19,2 320 134 58 77 230

Standard Equipment

  • Intake Pressure regulator
  • Intake pressure safety valve
  • Inlet Solenoid Valve NC
  • Inlet Pressure Manometer
  • Inlet Pulsation chamber
  • Inlet Safety Pressure Switch, with alarm & shutdown error
  • Inlet pressure Safety Valve
  • Inlet Vacuum Safety Pressure Switch, with alarm & shutdown error
  • Condensate Separator after 2nd Stage
  • Extended Stainless Steel Intercoolers & Aftercooler in all stages
  • Large fan for optimum cooling (500mm diam.)
  • Safety Valves in all stages
  • Gas Purifying Filter
  • Non-return valve
  • HP outlet ¼’’ BSP
  • Inter stage (1st, 2nd) manometers and Final Stage 400 bar manometer.
  • Star/Delta starter system
  • Start/Stop switch
  • Emergency Stop button or/and main switch
  • Hour meter
  • Motor thermal overload protection
  • Automatic start & stop system
  • 24V secondary voltage providing safety during routine operation.
  • High temperature alarm & shutdown error
  • Low oil level alarm & shutdown error
  • Zero Loss Automatic Condensate Drain system via condensate/nitrogen return piping system, back inside compressor’s crankcase
  • Automatic belt tensioning system
  • Built-In Vibration Pads
  • Handles for easy lifiting
  • Soundproof covers at top,left & right side – Drilled opening doors at front side