Typhoon Nitrogen
High-pressure piston compressor for NITROGEN (N2), Compact, 3-staged, air cooled, oil lubricated, model Typhoon Classic 18E, 7,5kW/400V/50Hz, suitable for Nitrogen compression applications, CE certified.

|
|
|
|
Model |
Power Supply |
Max. Working Pressure (bar) |
Capacity |
Dimensions (cm) |
Weight (kg) |
m3/h |
lit/min |
L |
W |
H |
TYPHOON CLASSIC 18E (N2) |
7,5kW/400V/50Hz |
350 |
19,2 |
320 |
134 |
58 |
77 |
230 |
|
Standard Equipment
- Intake Pressure regulator
- Intake pressure safety valve
- Inlet Solenoid Valve NC
- Inlet Pressure Manometer
- Inlet Pulsation chamber
- Inlet Safety Pressure Switch, with alarm & shutdown error
- Inlet pressure Safety Valve
- Inlet Vacuum Safety Pressure Switch, with alarm & shutdown error
- Condensate Separator after 2nd Stage
- Extended Stainless Steel Intercoolers & Aftercooler in all stages
- Large fan for optimum cooling (500mm diam.)
- Safety Valves in all stages
- Gas Purifying Filter
- Non-return valve
- HP outlet ¼’’ BSP
- Inter stage (1st, 2nd) manometers and Final Stage 400 bar manometer.
- Star/Delta starter system
- Start/Stop switch
- Emergency Stop button or/and main switch
- Hour meter
- Motor thermal overload protection
- Automatic start & stop system
- 24V secondary voltage providing safety during routine operation.
- High temperature alarm & shutdown error
- Low oil level alarm & shutdown error
- Zero Loss Automatic Condensate Drain system via condensate/nitrogen return piping system, back inside compressor’s crankcase
- Automatic belt tensioning system
- Built-In Vibration Pads
- Handles for easy lifiting
- Soundproof covers at top,left & right side – Drilled opening doors at front side
|